Velleman VMB8PB - Manual (Page 14)

14 8-channel pushbutton module | VMB8PBU – ed.1
Alarm:
In the switching program it is possible to use two different wake-up times and two different sleep-times.
Setup is done via the VelbusLink software:
• Wake-up time in hours and minutes.
• Sleep-time in hours and minutes.
• Wake-up and sleep-times can be locally or global:
o Locally means the setting only applies to the selected module.
o Global means applicable for all modules that are set to ‘global’.
• The wake-up and sleep-times can be enabled or disabled:
o Enabled means that all program steps that use wake-up or sleep-times are executed.
o Disabled means that all program steps that use wake-up or sleep-times are not executed.
Activating/deactivating the alarm clock:
Programs that use wake-up or sleep-times can be activated or deactivated. This can be done through the Velbus
software or via pushbuttons connected to the Velbus.
Following options are available:
• Execute wake-up/sleep-time related programs as long as a Velbus pushbutton is closed.
• Execute wake-up/sleep-time related programs as long as a Velbus pushbutton is open.
• Do not execute wake-up/sleep-time related programs as long as a Velbus pushbutton is closed.
• Do not execute wake-up/sleep-time related programs as long as a Velbus pushbutton is open.
• Activate wake-up/sleep-time related programs via a push on a Velbus pushbutton.
• Activate/deactivate
wake-up/sleep-time related programs via a push on a Velbus pushbutton.
• Deactivate wake-up/sleep-time related programs via a push on a Velbus pushbutton.
Sunrise and sunset:
The switching program allows the use of the time of sunrise and sunset.
Setting is done through the VelbusLink software:
• Timetable for sunrise and sunset
• Activate or deactivate sunrise related programs
• Activate or deactivate sunset related programs
Activating/deactivating sunrise and sunset related programs:
Programs that use sunrise or sunset times can be activated or deactivated. This can be done through the Velbus
software or via pushbuttons connected to the Velbus.
Following options are available:
• Execute sunrise/sunset time related programs as long as a Velbus pushbutton is closed.
• Execute sunrise/sunset time related programs as long as a Velbus pushbutton is open.
• Do not execute sunrise/sunset time related programs as long as a Velbus pushbutton is closed.
• Do not execute sunrise/sunset time related programs as long as a Velbus pushbutton is open.
• Activate sunrise/sunset time related programs via a push on a Velbus pushbutton.
• Activate/deactivate sunrise/sunset time related programs via a push on a Velbus pushbutton.
• Deactivate sunrise/sunset time related programs via a push on a Velbus pushbutton.
Date and time:
To allow the switching programs to function correctly the date and time must be set. This can be done through the
VelbusLink software, a control panel (VMB4PD) or a temperature controller (VMB1TC). Make sure one main clock is
set on a VMB4PD or VMB1TC in your Velbus installation to synchronize all clocks