Velleman projects LAB1 Infosheet - Manual

www.vellemaninstruments.com
LAB1
In the box:
þ
LAB1 three in one LAB device
þ
Testing leads for DMM
þ
User manual
þ
Sponge
þ
Spare bit for soldering iron
þ
9V Battery for DMM
þ
Mains cable
REGULATED POWER SUPPLY
Selectable output voltages:
3 - 4.5 -6 - 7.5 - 9 - 12Vdc
Output 1.5A (2A peak)
LED overload indication
With output on/off switch
Very low ripple
LED power indication
SOLDERING STATION
Low-voltage iron: 24V
Ceramic 48W heating element with tem-
perature sensor
Temperature range: OFF– 150 -450°C
Low voltage iron : 24V
Lead free soldering compatible
DIGITAL MULTIMETER
3 1/2 backlit LCD
Automatic polarity indication
DC voltage 200mV to 600V in 5 steps
AC voltage 200V and 600V
DC current 200uA to 10A in 5 steps
Resistance test 200ohm to 2Mohm
Diode, transistor and continuity tester
Data Hold function and buzzer
CATI 600V
CATII 300V
EXTRA SAFETY FEATURES:
BATTERY POWERED DMM FOR COMPLETELY
ISOLATED MEASUREMENTS ! (1)
SEPARATE POWER SUPPLY FOR EACH UNIT (2, 3)
3 in one LAB device
Your space saving lab solution !
1 multimeter, 1 power supply, 1 soldering iron
This unit covers 99% of your home lab needs
Perfect solution for starters or schools.
Lack of space? No problem just stow your complete LAB back
in the box after use!
1 2 3