Velleman VM146 - Manual (Page 9)

9
Effect # Description
1 Static colours
Select a static colour by means of buttons (12) and (13).
Colours: Red - Green - Red/Green - Blue - Red/Blue - Green/Blue - Red/Green/Blue
2 Sequenced colours Same as above, but automatically sequenced
3 Sequenced primary colours Red - Green - Blue sequencer
4 Colour fade Fade Red-Green-Blue-Red
5 Flame effect 3 independent flame simulations
6 Strobo 3 outputs blink with 50% duty cycle
7 Random colours Random colours, hard transistions between colours
8 Random colours Random colours, soft transitions between colours
9 Random flashes Random colours, fade 0 -> 100% -> 0
10 Nightlight All channels 100%, next, slow off all channels, finally Blue remains at 10%
11 Traffic light Green, Blue, Red, Green sequence. Use Blue output for yellow light
Effects 2 to 11 feature adjustable speed. Press (11) to increase speed, press (10) to decrease speed
Memory: Once you have selected an effect and the desired speed, you can store it in memory by flipping the mode
switch to ‘RGB'. Next time, when you turn on the controller with the slide switch set to ‘eff’, it will revert to the effect you’ve
selected
Use