Velleman projects K8096 Assembly instructions - Manual (Page 3)

- 3 -
Features
capable of driving 1 stepper motor •
suited for bipolar motors •
current of the motor can be adjusted (trimmer) •
over current protection sensing •
onboard switch mode supply •
USB connection: control the motor using your computer •
DLL fi le supplied to write your own software •
Includes board to wire connections •
For software, visit www.vellemanprojects.eu
Specifi cations
power output: 750mA continuous, ( 1A peak) •
wide range AC - power input: 5 ... 30V •
5 dry-contact inputs •
1 logic open collector output •
power supply: 10 ... 30VAC •
dimensions: 117 x 65.5 x 25mm / 4.6 x 2.58 x 0.98” •
With the K8096 1-channel stepper motor card you can drive 1 stepper motor via USB, and monitor and
assign actions if needed to 5 dry contacts (for example an emergency stop signal, current limit detection).
There is 1 open collector output that can be switched via USB. Write your own application (.DLL in-
cluded). Suitable for all positioning applications (for example plotters, printers, valves, automation, etc.).