Velleman VM8201 User Manual
Velleman Hardware
Advertising
MOUNTING THE VM8201
YOU WILL HAVE TO REFLASH THE MAINBOARD OF THE PRINTER TO THE LATEST FIRMWARE (V2) TO USE THE
VM8201! YOU CAN FIND THE INSTRUCTIONS TO REFLASH THE MAINBOARD IN THE LAST CHAPTER OF THE ONLINE
MANUAL: “UPDATING FIRMWARE” http://www.k8200.eu/manual/printing/?c=007 . YOU CAN FIND FIRMWARE
V2 IN THE DOWNLOAD SECTION OF THE WEBSITE.
You will need the VM8201 module.
Solder the 18pin connector to the K8200 mainboard.
Advertising