Velleman MK193 INSTALLING THE DRIVER - Manual

INSTALLING THE DRIVER (WINDOWS 7)
Download the CubeAnimator 1.0 for Windows packet here:
http://www.velleman.eu/support/downloads/?code=MK193
Unpack the download and install the software. The driver for the MK193 is copied into the
default installation folder. In a 32‐bit version of Windows this is: C:\Program
Files\Velleman\CubeAnimator\Driver\MK193. In a 64‐bit version of Windows this is
C:\Program Files (x86)\Velleman\CubeAnimator\Driver\MK193.
After the installation connect the MK193 via a USB cable with the computer, in the bottom
right corner the following appears:
Wait for the computer to try and install the driver. This will fail and the following should
appear (It can take a while before you see this balloon because windows is checking the
internet for a driver):