Velleman VM167 - Manual (Page 7)

5 Page
Velleman Projects
Hardware Installation
Windows 2000/XP(32/64 bit)
After you've plugged in your device you should be prompted with the Windows 'Found New
Hardware Wizard'.
If the wizard did not open, you can open it manually through the following steps:
• Click Start -> Run..
• Type devmgmt.msc and press OK
• Search for a 'VM167 USB Interface Board' entry under the Other devices category
• Right-click the entry and click Update Driver..
You should now be prompted with the 'Hardware Update Wizard'.