Velleman К8056 User Manual
Page 2
2
This relay card can be used in several ways:
Stand alone card, addressed by switches or open collector
outputs.
Remote controlled through RS232.
In option remote controlled using RF (radio frequency) signals
and K8058 remote control+ RX433 module
Since the card can be addressed using RS232 commands, you
may write custom applications in any language you want or on
any platform you want.
Test software can be downloaded from our web site.
This device complies with Part 15 of the FCC Rules provided
the enclosed instructions are followed to the letter. Use of the
device is subject to the following conditions: (1) this device
must not cause harmful interference and (2) the operation of
this device should not be influenced by unwanted interference.
More information about FCC can be look at http://www.fcc.gov