V-Tech DT594 Manual - Manual (Page 12)

The design and specifications can be changed without notice to the user. Right to
interpret and copyright of this manual are preserved.
DT-ENG-594-V1 P130422
Specification
Power Supply : DC 24V (supplied by PC6);
Power Consumption: Standby 60mA; Working status 200mA;
Camera: 1/4 ACS 4T image sensor with DSP processor
Lock Power supply: 12Vdc, 300mA(Internal Power);
Working temperature: -10ºC ~ +45ºC
Dimension: 188(H)×110(W)×34(D)mm
Precautions
• Please clean the unit with soft cotton cloth, don't use the organic impregnant
or chemical clean agent. If necessary, please use a little pure water or dilute
soap water to clean the dust.
• The unit is weather resistant. However do not spray high pressure water on
access control keypad directly. Excessive moisture may cause problems with
the unit.
• You must use the right adaptor which is supplied by the manufacturer or ap-
proved by the manufacturer.
• Pay attention to the high voltage inside the products, please refer service
only to a trained and qualified professional.