Specification – V-Tech DT595A Info User Manual
Page 3
3. Specification
* Power Supply :
DC 24V (supplied by PS4-24V or PS5-24V);
* Power Consumption:
Standby 20mA; Working status 60mA;
* Unlocking time:
1-9S, set by monitor;
* Talk Time:
90S;
* Lock Power supply:
12Vdc, 300mA(Internal Power);
* Temperature:
-10
0
C~+45
0
C;
* Wiring:
2 wires (non-polarity);
* Dimension:
150(H)×28(W)×40(D)mm
Mounting with rainy and 30
0
angle bracket
Note:1. the rainy cover is included in the package.
2. the 30
0
angle bracket is not included in the package, it should supply separately.
The location of outdoor station should keep away from snow,rain,and intensity light.
Accessory contents:
Accessories include a screwdriver T20, one M4X10 screw, two PA4X25 screws,three PA3x25
screws,three PM3x12 screws,and five screw stoppers Φ6X30.
Installation steps:
Installation height for door station usually is 145~160cm.
1. Use screws to fix the back panel and rainy cover to the wall after connect the cable correctly.
2. Attach the front panel to the back panel, then use the screw to fix it.
TX20-4*10
PM3*12
PA4*25
1
2
3
4