V-Tech VT24 Manual - Manual (Page 10)

7. Public Memory Sharing(Optional)
8. Basic Setup Instructions
Ring Tone Settings
Wiring Diagram for Public Memory Sharing
Select Tools item on main menu page,then select User Setup->>Call Tone->> DS Call
Tone or Intercom Call Tone, There are 12 pieces ring tones can be selected.Select a
ring tone you want, then touch Menu button to save and return last page.but if you
don't want to save the settings, touch button to exit.
To perform memory sharing function ,the system must connect VT-MEM module.
Public memory sharing means that all monitors can view the recorded pictures which is
saved in VT-MEM unit.(about VT-MEM module instructions, plaese refer to VT-MEM
user manual for more detail information)
For each time calling,the system will record one image automatically.
To view the recorded pictures,tap Memo button. If the system receives new recorded
pictures,the Memo button will blink all the time until the pictures have been viewed.
Press / button to view last/next picture.
DS Call Tone :set the ring tone calling from outdoor station.
Intercom Call Tone :set the ring tone calling from intercom call or inner call.
4 4 4 4

TALK TALK TALK
VT-MEM
User code=1 User code=2 User code=N(N<5)
JVD Reserve JVD Remove JVD Reserved
PS12V
-9-