V-Tech AT27_TD7 Manual - Manual (Page 6)

Ring tone set
Screen and talk volume set
Monitor time set
Total 12 pieces ring tones can be selected.
Different ring tones can be set to identify
different calls from Door Station call,Intercom
call or Door Bell call.
To open ring tone setting page,please select
Main menu ->User Setup->Door Station
call tone/Intercom call tone/Door Bell call
tone. Choose a ring tone you like , then save
the setting, the ring tone will be performed
immediately.
During monitoring or talking state,press
“
Adjust” icon,Brightness/Color/Scene/Talk
volume can be adjusted on monitor.
1. Scene mode selection: Total 4 screen
modes can be selected in sequence:
Normal, User, Soft and Bright. Note that
only at User mode that you can modify
The monitor time is the duration time that the
monitor can view outside,90 seconds is the
default monitor time.But it can be changed at
any time.To change the monitor time,please
select
Main menu->User setup->Monitor
time,Input the value by touching the digital
keypad,use
key to cancel the input,after
finish input,press key to save the settings.
-4-
Monitor time set：
min：[01] sec：[30]
5
Brightness or colour. whenever you modify Brightness or colour item , the Scene mode item
will be set to User mode automatically.
2. The Brightness and Colour item is for the image quality setting, adjust the value to get the
best image you like.
3. The Talk Volume item is talking volume adjustment.
Note that all the modifications will be done immediately after the operation.