V-Tech DT16_D3AL Manual - Manual (Page 6)

3. Basic Door Release Operation
4.Intercom Function
1. Press CALL button on outdoor station , the
Monitor rings, at the same time, the screen
displays the visitor image.
2. Press TALK Button on monitor, you can
communicate hands free with the visitor for 90
seconds.After finishing communication,press
"TALK" button again to end the communication
. If
nobody answers the phone, the screen will be
turned off automatically after 40 seconds.
3. During talking state, Press UNLOCK Button to open the door for the visitor.
4. When the monitor is in standby mode, press MONITOR Button(or select item on
main menu page), The screen will show the icon 1
2
3
4
, if multi door stations are installed.
press ▲ button to choose the first camera,the screen will display the image from the
first door camera.Similarly, Press
button to choose the second one,Press ▼ button
to choose the third one, Press button to choose the fourth one. Press"MONITOR"
button again to end monitoring.
When the monitor is in standby mode, press CALL
Button to enter Intercom Function page(or select
item on main menu page). Use ▲ / ▼ Button to
move upward / downward to select the item you want,
press MENU Button to enter.
Intercom Function
Intercom Call
Inner Call
Direct Dial Guard Unit
Exit
2
- Name List -
[01] Mr A
[02] Mr B
[03] Mr C
[04] Mr D
[05] Mr E
1. Intercom Call : User in one apartment can call
other apartments in the system. the namelist will
be created automatically by the system. Selete a
name on the screen then press CALL Button to
call.(Note:1. Press "CALL" button again to redial.
2. Press "TALK" button to cancel the call. 3.The
DIP switches code of the monitors are not the
same.)