Warrior 1135_RJR CG529B MAXI-BREEZER TOP (1987 – 1996 Jeep YJ Wrangler) User Manual
Maxi-breezer top, Installation instructions
Protecting Your Adventure Lifestyle
========================================================================================
QUALITY • INTEGRITY • INNOVATION • SERVICE
Warrior Products, Inc.
16850 SW Upper Boones Ferry Rd
Ste. A
Durham, OR 97224
Phone (888) 220-6861
Fax (503) 692-0364
MAXI-BREEZER TOP
INSTALLATION INSTRUCTIONS
WAR 1135 / RJR CG529B
YJ’92-’96
NOTE: Installation of this top requires a windshield retaining channel, if you do not have one it can be
purchased at your local offroad shop- Bestop part #51209-01 or OutLand part #90101
1. Install the windshield retaining channel if needed
2. Insert folded webbing at front edge into your windshield channel
3. Wrap & attach rear straps, cinch until you have proper tension from front to back
4. Long center strap goes to footman loop on windshield frame
5. Wrap & attach side straps same as rear, cinch until you have proper tension
6. Attach rear straps firmly
7. Adjust all straps until you have a tight fit
Your Breezer Top is now fully installed.
Enjoy your new Breezer Top!
If you need further assistance installing your product, please contact us by email at
or call us at (888) 220-6861.
THANK YOU FOR PURCHASING WARRIOR PRODUCTS