Warrior 520 BUMPER WITH HITCH (1976 – 1986 Jeep CJ5, CJ7, CJ8) - Manual

Protecting Your Adventure Lifestyle
========================================================================================
QUALITY • INTEGRITY • INNOVATION • SERVICE
Warrior Products, Inc.
16850 SW Upper Boones Ferry Rd
Ste. A
Durham, OR 97224
Phone (888) 220-6861
Fax (503) 692-0364
[email protected]
BUMPER WITH HITCH
INSTALLATION INSTRUCTIONS
WAR 520
1. Remove stock “Bumperettes”. Retain bolts, washers, and nuts for installing your
new Bumper.
2. Install Bumper using bolts removed in #1 above. Tighten to manufacturer’s
suggested torque. Be sure there is a washer under the bolt head and between the
nut and the frame. (Washers are not provided)
3. The two bolts and lock washers provided are to be used on the bottom of the
Bumper. Tighten bolts to 50 ft. lbs. torque.
If you need further assistance installing your product, please contact us by email at
[email protected] or call us at (888) 220-6861.
THANK YOU FOR PURCHASING WARRIOR PRODUCTS