VEGA VEGADIS 61 User Manual
Page 14
Advertising
![background image](/manuals/261064/14/background.png)
8
Press down the opening levers of the terminals, you will hear the
terminal spring closing
9
Check the hold of the wires in the terminals by lightly pulling on
them
10 Connect the screen to the ground terminal
11 Connect the ground terminal outside on the housing according to
specification (low impedance)
12 Tighten the compression nut of the cable entry. The seal ring must
completely encircle the cable
13 Screw the housing cover back on
The electrical connection is finished.
Fig. 9: Connection steps 6 and 7
14
VEGADIS
61
5 Connecting to the sensor
27720
-EN
-120329
Advertising