VEGA VEGAPULS 66 (≥ 2.0.0 - ≤ 3.8) 4 … 20 mA_HART four-wire User Manual
Page 17
ca. 10 mm
Fig. 9: Tube extension
Tip:
VEGAPULS
66
is optionally also available with antenna extension.
H
ence the antenna length can be selected such that the antenna end
protrudes 10 mm (0.4 in) out of the socket.
A
lign the sensor in liquids as vertical as possible to the product surface
to achieve optimum measurement.
Fig. 10: Alignment in liquids
T
he mounting location of the radar sensor should be a place where no
other equipment or fixtures cross the path of the microwave signals.
V
essel installations such as, for example, ladders, limit switches,
heating spirals, struts, etc. can cause false echoes that get super-
imposed on the useful echo. Make sure when planning your measuring
site that the radar sensor has a "clear view" to the measured product.
I
n case of existing vessel installations, a false echo storage should be
carried out during setup.
Sensor orientation
Vessel installations
VEGAPULS
66 • 4 … 20
mA/HART four-wire
17
4 M
ounting
28443
-EN
-090305