VEGA VEGADIF 34 … 51 - Manual (Page 23)

VEGADIF 34 … 51 23
20094-EN-030731
Rotating the display
If the integrated display is not correctly posi-
tioned it can be rotated in 90° steps after
opening the housing cover.
Avoid exposure of the electronics compart-
ment and carry out these measures if possible
in a workshop.
1 Unscrew the display cover
2 Push the protruding clamp with a screw-
driver outwards
Mounting
3 Tilt the display in this position and take
it out
4 Rotate display as needed
Note
Do not turn more than 2 x 90° to the left or
right, otherwise the connection cable will be
damaged.
5 Insert the display into the clamp until it
snaps in
6 Screw the cover back on
Remove the protective cover
Transmitter or isolating diaphragm are pro-
vided with protective plastic covers. Remove
them before installation.