2 adjustment with the adjustment module minicom, Adjustment with pactware, Adjustment with pdm – VEGA VEGAFLEX 55P (Profibus PA) User Manual
Page 26: Adjustment with the adjustment module minicom, The adjustment with pactware
26
VEGAFLEX 55P (Profibus PA)
Adjustment with PACTware
TM
The adjustment with PACTware
TM
corre-
sponds to VVO adjustment, in this case, VVO
runs as a subprogram of PACTware
TM
. The
adjustment instructions can be found in the
documentation of PACTware
TM
.
Adjustment with PDM
The sensors can be adjusted completely with
PDM. However, some convenient functions
and many special features, like e.g. display
of an echo curve, are not available. In addi-
tion to the PDM software, an EDD (upon
request available from VEGA) is required for
each sensor type. The adjustment instruc-
tions for PDM are described in the PDM
documentation.
Adjustment with the adjustment module
MINICOM
With the adjustment module MINICOM, you
adjust the individual sensor directly in the
sensor or in the external indicating instrument
VEGADIS 50. The adjustment module
MINICOM enables (with the 6-key adjustment
field with text display) all essential functions
of parameter setting and adjustment.
Setup
4.2 Adjustment with the adjustment
module MINICOM
Just as with the PC, you can adjust the sen-
sor with the small, detachable adjustment
module MINICOM. The adjustment module is
plugged into the sensor or into the external
indicating instrument (optional).
4 ... 20 mA
2
4
-
+
ESC
OK
Tank 1
m (d)
12.345
-
+
ESC
OK
Tank 1
m (d)
12.345
All the adjustment options provided by a PC
with the adjustment program VVO are also
available with the adjustment module
MINICOM. You can carry out all adjustment
steps with the 6 keys of the adjustment mod-
ule. A small display shows you, apart from
the measured value, a short message on the
menu item or an entered numerical value.
However, not possible are parts of the ad-
justment relating to configuration and signal
processing (e.g. linearisation curve). This is
only possible with the PC.