VEGA VEGAVIB 62 - two-wire User Manual
Page 20
Mode on the
sensor
Level
Signal current -
Sensor
Signal lamp -
sensor
Max.
Overflow protec-
tion
8 mA
Green
Max.
Overflow protec-
tion
approx. 16 mA
Red
Min.
Dry run protection
approx. 8 mA
Green
Min.
Dry run protection
approx. 16 mA
Red
Fault message
(min./max. mode)
any
<
2.3 mA
flashes red
VEGAVIB 62 level switch with signal conditioning instrument
1
)
The following chart provides an overview of the switching conditions
depending on the adjusted mode of the signal conditioning instrument
and the level.
Note:
Keep in mind that the mode switch of VEGAVIB 62 must be always set
to "max.".
Mode on the
signal condi-
tioning in-
strument
Level
Signal cur-
rent - Sensor
Signal lamp -
sensor
Signal lamp -
signal condi-
tioning in-
strument
Mode A
Overflow pro-
tection
approx. 8 mA
Green
1)
You will find suitable signal conditioning instruments in chapter "Technical
data".
20
VEGAVIB
62 • - two-wire
6 Set up
29274
-EN
-120418