VEGA VEGASON series 60 Electronics module - Manual (Page 12)

Note:
Makr sure that the housing is not rotated during the electronics
exchange. The connection plug in the housing for the
electronics can then be in another position.
6 Insert the new oscillator carefully. Make sure that the plug
is in the correct position.
7 Insert the two hold screws and tighten them
8 Connect the internal connection cables as follows: red to
terminal 1, black to terminal 2, on VEGASON 64, 65 and 66
connect also the plug connector
9 Screw the housing cover back on
The electronics exchange is now finished.
As a rule, the exchange of the electronics must be
documented internally when used in Ex applications.
12 Electronics module - VEGASON series 60
Mounting
30206
-EN
-070510