VEGA VEGASON 64 4 … 20 mA_HART four-wire User Manual
Page 12
T
he reference plane for the measuring range (version A) is the lower
edge of the flange. The reference plane for versions B, C and D is the
lower edge of the transducer.
R
emember that with all versions there is a minimum distance below
the reference plane - the so-called dead band - in which measurement
is not possible; this distance from reference plane to medium must not
be underrun. The exact value of the dead band is stated in chapter
"
Technical data".
Information:
I
f the medium reaches the transducer, buildup can form on it and
cause faulty measurements later on.
1
3
2
100%
0%
4
Fig. 3: Version A - Measuring range (operating range) and max. measuring
distance
1
full (dead band)
2
empty (max. measuring distance)
3
Measuring range
4
Reference plane
Measuring range
12
VEGASON
64 • 4 … 20
mA/HART four-wire
4 M
ounting
28781
-EN
-081127