VEGA VEGAFLEX 66 (-110…+400°C) Profibus PA User Manual
Page 15
Advertising
Keep in mind that buildup can form on the spacers. Strong
buildup can influence the measurement.
1
Fig. 4: Position of the spacer
1
Spacer
Note:
Measurement in a standpipe is not recommended for very
adhesive products.
Make sure that the probe is not subjected to strong lateral
forces. Mount VEGAFLEX 66 at a position in the vessel where
no disturbances, e.g. from filling openings, agitators, etc., can
occur.
Inflowing medium
VEGAFLEX
66 • Profibus PA
15
4 Mounting
32764
-
EN
-080716
Advertising