Document Outline

• Quick start
• 1 About this document
  • 1.1 Function
  • 1.2 Target group
  • 1.3 Symbolism used
• 2 For your safety
  • 2.1 Authorised personnel
  • 2.2 Appropriate use
  • 2.3 Warning about incorrect use
  • 2.4 General safety instructions
  • 2.5 CE conformity
  • 2.6 NAMUR recommendations
  • 2.7 Radio license for Europe
  • 2.8 Radio license for USA/Canada
  • 2.9 Environmental instructions
• 3 Product description
  • 3.1 Configuration
  • 3.2 Principle of operation
  • 3.3 Packaging, transport and storage
  • 3.4 Accessories and replacement parts
• 4 Mounting
  • 4.1 General instructions
  • 4.2 Instructions for installation
• 5 Connecting to the bus system
  • 5.1 Preparing the connection
  • 5.2 Connecting
  • 5.3 Wiring plan, single chamber housing
  • 5.4 Wiring plan, double chamber housing
  • 5.5 Wiring plan, double chamber housing Ex d
  • 5.6 Wiring plan - version IP 66/IP 68, 1 bar
  • 5.7 Set instrument address
  • 5.8 Switch-on phase
• 6 Set up with the indicating and adjustment module
  • 6.1 Insert indicating and adjustment module
  • 6.2 Adjustment system
  • 6.3 Parameter adjustment
  • 6.4 Saving the parameter adjustment data
• 7 Setup with PACTware
  • 7.1 Connect the PC
  • 7.2 Parameter adjustment with PACTware
  • 7.3 Saving the parameter adjustment data
• 8 Set up with other systems
  • 8.1 DD adjustment programs
• 9 Diagnosis, Asset Management and service
  • 9.1 Maintenance
  • 9.2 Measured value and event memory
  • 9.3 Asset Management function
  • 9.4 Rectify faults
  • 9.5 Exchanging the electronics module
  • 9.6 Software update
  • 9.7 How to proceed in case of repair
• 9.4 Measurement error with constant level
• 9.4 Measurement error during filling
• 9.4 Measurement error during emptying
• 10 Dismounting
  • 10.1 Dismounting steps
  • 10.2 Disposal
• 11 Supplement
  • 11.1 Technical data
  • 11.2 Communication Profibus PA
  • 11.3 Dimensions
  • 11.4 Industrial property rights
  • 11.5 Trademark
• 11.2 Instrument master file
• 11.3 ID number
• 11.4 Cyclical data traffic
• 11.5 Module of the PA sensors
• 11.6 Examples of telegram configuration
• 11.7 Data format of the output signal
• 11.8 Coding of the status byte associated with the PA output value