Ba c – VEGA VEGASOURCE 35 Emitter loading and exchange User Manual
Page 4
11
4
5
3
1 2
2
B
A
C
6
8
7
9
3
6
7
10
8
9
2
10
Fig. 2: Type labels - Example (version A)
A
Type label - Source holder
B
Type label - Source
C
Adhesive type label - Source
1
Serial number - Source holder
2
Order code - Source holder
3
Number of the corresponding operating instructions
4
Exit angle
5
Local dose rate at defined distance from the surface
6
Note: "Highly radioactive source" (if necessary)
7
Radionuclide: Cs-137 or Co-60
8
Serial number of the source capsule (for traceability of the source)
9
Activity of the source in MBq or GBq
10
Date (mm/yyyy)
11
Data-Matrix-Code
Make sure that the necessary accessories and tools are available and
in technically perfect condition.
Make sure that the key for the lock/locks is available with the source
container.
Load the source holder or exchange the source capsule with utmost
care.
Use a suitable gripping device or a manipulator when inserting or
exchanging the source capsule.
To increase the distance to the source capsule, you can make and
implement an extension rod according to the following illustration.
Tools and accessories
4
Emitter loading and exchange • VEGASOURCE 31 35
1 Safety instructions
39155
-EN
-110210