VEGA PROTRAC series 30 Electronics module User Manual
Page 12
Advertising
12
4 Mounting
Electronics module • PROTRAC series 30
40104-EN-130916
Keep the position of the plug connections inside the electronics
module in mind (take note of the gap in the base and the cor-
responding pins)
1
2
4
5
3
Fig. 7: Loosening the holding screws
1 Housing cover
2 Electronics module
3 Protective cap
4 Optical pad
5 Instrument housing
9. The optical pad (4) can stick to the round glass window at the
bottom in the housing. In this case, use a small screwdriver to
remove the optical pad (4) carefully. If you have small, slender
hands, you can remove the optical pad (4) using just your hands.
10. Dispose of the old optical pad (4)
11. Clean the glass window (9) with a lint-free cloth. Do not use any
cleaning detergents. See following illustration.
Advertising