3 wiring plan, single chamber housing – VEGA VEGABAR 54 4 … 20 mA User Manual
Page 17
Advertising
17
5 Connecting to power supply
VEGABAR 54 • 4 … 20 mA
36725-EN-130321
9. Check the hold of the wires in the terminals by lightly pulling on
them
10. Connect the screen to the internal ground terminal, connect the
outer ground terminal to potential equalisation
11. Tighten the compression nut of the cable entry. The seal ring must
completely encircle the cable
12. Screw the housing cover back on
The electrical connection is hence finished.
Fig. 7: Connection steps 6 and 7
5.3 Wiring plan, single chamber housing
The following illustrations apply to the non-Ex as well as to the Ex-ia
version.
Advertising