8 setup with pactware, 1 connect the pc – VEGA FIBERTRAC 31 4 … 20 mA_HART - four-wire With SIL qualification User Manual
Page 61
Advertising
61
8 Setup with PACTware
FIBERTRAC 31 • 4 … 20 mA/HART - four-wire
43386-EN-131119
8 Setup with PACTware
8.1 Connect the PC
2
1
3
Fig. 18: Connection of the PC directly to the sensor via the interface adapter
1 USB cable to the PC
2 Interface adapter VEGACONNECT 4
3 ">Sensor
Information:
The interface adapter VEGACONNECT 3 is not suitable for connec-
tion to the sensor.
1
5
2
4
3
OPEN
TWIST
USB
LO
CK
Fig. 19: Connecting the PC via HART to the signal cable
1 FIBERTRAC 31
2 HART resistance 250 Ω (optional depending on processing)
3 Connection cable with 2 mm pins and terminals
4 Processing system/PLC/Voltage supply
5 Voltage supply
Necessary components:
Via the interface adapter
directly on the sensor
Connection via HART
Advertising