Asus PCI-N10 - Manual (Page 15)

PCI-N10 WLAN Card User Manual
12 ASUS WLAN Card
2. Click General table and then click
ICS to enable ICS. The General table
displays the wireless clients that are
currently connecting to the Soft AP.
To switch to the Soft AP mode:
1. Click AP to switch to the Soft AP
mode.
. Soft AP mode (Windows ® XP/Vista/7)
The ASUS PCI-N10 WLAN Card supports the Soft AP mode. In this mode, the
WLAN card acts as a virtual AP.
The picture indicates that your WLAN
card has switched to the Soft AP
mode successfully.
• The ASUS WLAN Card Setting
Utility icon in the system tray
switches to the ASUS Wireless
Access Point Utility icon .
IMPORTANT: Before configuring the Soft AP mode, connect your computer to a
wired network to provide network access for your wireless clients.
3. Select a network(station) from the
available networks list, then click
Apply.