C&H Technology CSD3080H - Manual (Page 3)

S-2
Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272
CSD3080H
Single SCR POW-R-BLOK™ Modules
400 Amperes/800 Volts
Absolute Maximum Ratings
Characteristics Symbol CSD3080H Units
Peak Forward Blocking Voltage VDRM 800 Volts
Transient Peak Forward Blocking Voltage (Non-Repetitive) t < 5ms VDSM 960 Volts
DC Forward Blocking Voltage VD(DC) 640 Volts
Peak Reverse Blocking Voltage VRRM 800 Volts
Transient Peak Reverse Blocking Voltage (Non-Repetitive), t < 5ms VRSM 960 Volts
DC Reverse Blocking Voltage VR(DC) 640 Volts
RMS On-State Current IT(RMS) 620 Amperes
Average On-State Current, TC = 66°C IT(AV) 400 Amperes
Peak One-Cycle Surge (Non-Repetitive) On-State Current (60Hz) ITSM 8000 Amperes
Peak One-Cycle Surge (Non-Repetitive) On-State Current (50Hz) ITSM 7300 Amperes
I2t (for Fusing), 8.3 milliseconds I2t 267,000 A2sec
Critical Rate-Of-Rise of On-State Current* di/dt 100 Amperes/ ␮ s
Peak Gate Power Dissipation PGM 10 Watts
Average Gate Power Dissipation PG(AV) 3 Watts
Peak Forward Gate Voltage VGFM 10 Volts
Peak Reverse Gate Voltage VGRM 5.0 Volts
Peak Forward Gate Current IGFM 4.0 Amperes
Storage Temperature TSTG -40 to 125 °C
Operating Temperature Tj -40 to 125 °C
Maximum Mounting Torque M5 Mounting Screw — 17 in.-lb.
Maximum Mounting Torque M8 Terminal Screw — 72 in.-lb.
Module Weight (Typical) — 450 Grams
V Isolation VRMS 2500 Volts
*Tj = 125°C, IG = 1.0A, VD = 1/2 VDRM