Vishay high power products, Map block power module single thyristor, 500 a – C&H Technology VSKS500-08PbF User Manual

Page 4

Advertising
background image

Document Number: 93160

For technical questions, contact:

[email protected]

www.vishay.com

Revision: 14-Dec-09

3

VSKS500-08PbF

MAP Block Power Module

Single Thyristor, 500 A

Vishay High Power Products

Note

• Table shows the increment of thermal resistance R

thJC

when devices operate at different conduction angles than DC

TRIGGERING

PARAMETER

SYMBOL

TEST CONDITIONS

VALUES

UNITS

Maximum peak gate power

P

GM

T

J

= T

J

maximum, t

p

≤ 5 ms

10.0

W

Maximum average gate power

P

G(AV)

T

J

= T

J

maximum, f = 50 Hz, d% = 50

2.0

Maximum peak positive gate current

I

GM

T

J

= T

J

maximum, t

p

≤ 5 ms

3.0

A

Maximum required DC gate voltage to trigger

V

GT

T

J

= 25 °C

Anode supply: 12 V resistive load

3

V

Maximum required DC gate current to trigger

I

GT

200

mA

Maximum holding current

I

H

600

Maximum peak positive gate voltage

+V

GM

T

J

= T

J

maximum, t

p

≤ 5 ms

20

V

Maximum peak negative gate voltage

-V

GM

5.0

DC gate voltage not to trigger

V

GD

T

J

= T

J

maximum

Maximum gate current/voltage not to trigger is
the maximum value which will not trigger any
unit with rated V

DRM

anode to cathode applied

0.30

V

DC gate current not to trigger

I

GD

10

mA

Maximum non-repetitive rate of rise of
turned-on current

dI/dt

Gate drive 20 V, 20

Ω, t

r

≤ 1 μs

T

J

= T

J

maximum, anode voltage

≤ 80 % V

DRM

,

I

t

= 400 A

1000

A/μs

THERMAL AND MECHANICAL SPECIFICATIONS

PARAMETER

SYMBOL

TEST CONDITIONS

VALUES

UNITS

Maximum junction operating and storage
temperature range

T

J

, T

Stg

- 40 to 130

°C

Maximum thermal resistance,
junction to case per junction

R

thJC

DC operation

0.08

K/W

Maximum thermal resistance,
case to heatsink per module

R

thCS

Mounting surface smooth, flat and greased

0.035

Mounting
torque ± 10 %

MAP Block to heatsink

A mounting compound is recommended and
the torque should be rechecked after a period
of 3 h to allow for the spread of the compound.
Lubricated threads.

6 to 8

Nm

busbar to MAP Block

12 to 15

Approximate weight

430

g

15.3

oz.

Case style

MAP Block Power

ΔR CONDUCTION PER JUNCTION

DEVICES

SINUSOIDAL CONDUCTION

AT T

J

MAXIMUM

RECTANGULAR CONDUCTION

AT T

J

MAXIMUM

UNITS

180°

120°

90°

60°

30°

180°

120°

90°

60°

30°

VSKS500

0.013

0.0148

0.018

0.026

0.044

0.082

0.0142

0.019

0.027

0.044

K/W

Advertising