C&H Technology 199 PEL-SI - Manual (Page 8)

199 PEL-SI
Vishay BCcomponents Aluminum Capacitors
Power Economy Long Life Snap-In
www.vishay.com For technical questions, contact: [email protected] Document Number: 28363
112 Revision: 07-Dec-09
Table 4
Table 5
MULTIPLIER OF RIPPLE CURRENT (I
R
) AS A FUNCTION OF FREQUENCY
FREQUENCY (Hz) I
R
MULTIPLIER
50 0.90
100 0.95
120 1.00
500 1.20
1000 1.30
≥ 10 000 1.40
TEST PROCEDURES AND REQUIREMENTS
TEST PROCEDURE
(quick reference)
REQUIREMENTS
NAME OF TEST REFERENCE
Endurance IEC 60384-4/
EN130300
subclause 4.13 T
amb
= 105 °C; U
R
applied: 2000 hours DC/C: ± 15 %
ESR
≤ 1.3 x spec. limit
I
L5
≤ spec. limit
Useful life CECC 30301
subclause 1.8.1 T
amb
= 105 °C; U
R
and I
R
applied: 3000 hours DC/C: ± 30 %
ESR
≤ 3 x spec. limit
I
L5
≤ spec. limit
no short or open circuit,
no visible damage
total failure percentage:
≤ 3 %
Shelf life
(storage at
high temperature) IEC 60384-4/
EN130300
subclause 4.17 T
amb
= 105 °C; no voltage applied;
500 hours
after test: U
R
to be applied for 30 minutes,
24 hours to 48 hours before measurement
DC/C: ± 20 %
ESR
≤ 2 x spec. limit
I
L5
≤ 1 x spec. limit