Atdec Telehook TH-TVCH Installation manual - Manual (Page 4)

LOOSEN
TIGHTEN TIGHTEN
Installation Complete
No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty Ltd.
Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published 1.11.13 ©
Step 9. Mount Screen
Step 10. Adjust Tilt Step 11. Cable management
Cable Caps
Routing Options
9.1 Align top
Socket Head bolts
to upright holes.
Socket Head Bolt
M8 Button
Head Screws
& Washers
21mm OD
Silver washer
Allen Key
Uprights
Top mounting Bracket
9.2 Insert bolts through key holes and lower
to secure.
10.1 Using the provided
spanners to adjust tilt, hold
down the nut on the inside of the
upright whilst turning the bolt on
the outside.
Hold Tighten|Loosen
9.3 Insert the remaining socket head bolts
and washers on to the bottom bracket before
fastening all of the screws.