B&W Trailer Hitches Turnoverball Model 1384 (Dodge) User Manual
Model 1384, Attention, Warning
B&W Trailer Hitches
1216 HWY 224 / PO Box 186
Humboldt, KS 66748
P:620.473.3664
F:620.473.3766
Turnoverball™ Gooseneck Hitch Installation Instructions
Call or Email us for
Installation Support
www.turnoverball.com
Do not exceed tow or tongue rating of coupler, tow or
tongue rating of hitch, or tow or weight ratings of truck
or trailer. See vehicle and trailer manufacturer
information for ratings. Exceeding these ratings may
cause damage to towing components or loss of
attachment between the trailer and truck.
Adding components such as a Turnoverball hitch to
the chassis of any vehicle can be hazardous. There is
potential for unexpected combustion of fuel, electric
shock, burns, shifting or falling of unstable vehicle,
damage to vehicle, injury from tool usage and many
other hazards. This installation must be completed by
someone who is aware of the hazards involved. This
person must be knowledgeable of proper safety
procedures for a vehicle modification of this nature,
and for usage of the equipment required to perform
the installation.
Failure to comply with the safety information in these
instructions could result in serious injury or death.
Read all installation and operating instructions along
with all labels before using this product.
Without proper knowledge, towing can be a
dangerous activity. Understand all the risks involved
with towing before proceeding. For information on
towing safety, see "The Trailer Handbook: A guide
to Understanding Trailer and Towing Safety" from
the National Association of Trailer Manufacturers,
www.NATM.com.
The Turnoverball hitch comes equipped with a 2−5/16"
ball. Trailers towed with the ball provided must have a
2−5/16" coupler. Towing with a larger coupler could
cause loss of attachment between the trailer and the
tow vehicle.
Do not modify this product in any manner. Doing so
could alter its integrity and lead to a loss of attachment
between the trailer and the tow vehicle.
WARNING
<THESE INSTRUCTIONS MUST BE GIVEN TO THE END USER>
MODEL 1384
2014 RAM 2500 3/4 Ton Long & Short bed Trucks.
If you intend to use an 18K Companion 5th Wheel RV Hitch model 3000 in a 2014 or newer RAM
truck, please call us at 800−248−6564 for a kit that fills voids in the truck bed rib pattern. Using the
model 3000 Companion on a 2014 or newer RAM without the supplemental kit could result in
damage. RV Models 3400 and 3500 do not need a supplemental kit.
ATTENTION:
PARTS LIST
QTY
DESCRIPTION
ITEM
1
Center Section
1
1
Safety Chain Bracket
2
2
Threaded Block
3
1
Latch Pin Handle
4
1
Plastic Spacer Block
5
2
1/2" x 1−1/2" x 3−1/8" U−Bolt
6
1
2−5/16" Ball
7
4
Conical Spring
8
4
1/2" Center Lock Nut
9
1
Hole Template
10
HARDWARE KIT
DESCRIPTION
QTY
1/2" x 1−1/2" Bolt
3
1/2" Lock Washer
3
1/2" Finish Nut
3
5/8" X 1−1/2" Locking Cap Screw
4
3/8" X 1" Carriage Bolt
2
3/8" Locking Flange Nut
2
7
1
2
3
3
4
5
6
6
8
9
9
8
10