Cortech GW CREASEMASTER PLUS 4600 CREASING SYSTEM User Manual
Page 21
Advertising
The Strike Perf option can be programmed to come on and off up to 5 times for each
piece of paper. Press the key to program the position where you want the
0.00
Strike Perf to begin. Once programmed, press the Enter ( ) key to return to the
programming screen. Press the key to program the distance from the lead edge
where the Strike Perf is to turn off. Press the NEXT key to program more Strike Perf
locations. If no more Strike Perf locations are needed, press the PERFCOMPLETE
0.00
key and proceed to page 25.
Page 21
Advertising