Milton CAT AP1055D - Manual (Page 10)

10
Optional Generator System
The high capacity, integrated generator ensures peak performance and high reliability.
Industrial, Single-Phase Generator
The 24 kW generator is hydraulically
driven through a load-sensing,
pressure-compensating pump providing
quiet operation.
Single Control Switch
A single switch on the tractor’s
operating console activates the
generator. The generator operates at
1800 rpm and includes GFCI
protection.
Full Power
Full power is provided to the electric
screed and auxiliary power panel while
the engine is operating at low idle
speed. A control manifold and internal
voltage regulator maintains constant
frequency and voltage at both high and
low idle.
Optional Auxiliary Power Panel
The power panel provides 8 kW of
power and includes four 120-volt
receptacles protected by ground fault
circuit interruption (GFCI) and two
240-volt receptacles.
Power Needs
The auxiliary power panel can be used
to supply power for night-time lighting
and job site work tools.
Auxiliary Power Panel Door
The panel door can remain closed
while power cords are attached to the
receptacles providing effective
protection.
Optional Auxiliary Power Panel
The auxiliary power panel provides efficient power for night-time lighting and other
job site power needs.