Milton CAT 314D LCR - Manual (Page 8)

8
Compact Radius
Flexibility in tight quarters and peace of mind
Compact Radius Design
The 314D CR/314D LCR features a compact radius design
which makes it ideal for working in space restricted conditions
such as close to buildings, against walls/fences/embankments,
wooded residential lots, road construction – limiting lane
closures, logging roads or just generally “crowded” job sites.
This is not just a “city” machine. The tail swing radius is just
1.48 m (4'10") with the standard counterweight as compared
to 2.14 m (7'0") on the Cat 312D. When rotated 90 degrees
and working over the side, a minimal amount of counterweight
extends beyond the track width: 185 mm (7") of overhang with
600 mm (24") track shoes and standard counterweight. At the
end of the day, there is signifi cantly reduced risk of damage to
the machine and any job site obstacles which equates to lower
operating costs, better resale value, increased safety and more
operator comfort.
Operator Confi dence
Due to the 314D CR/314D LCR compact working envelope,
operators can work confi dently knowing that the counterweight
will not swing into objects behind them.
Comfort
The cab on the 314D CR/314D LCR is a comfortable place to
work, with low sound levels, good viewing area and convenient
access to the switches and controls. The 314D CR/314D LCR
cab offers many of the same amenities and options found on
the cab of the Cat 312D.
Working Envelope
To further minimize the working envelope, the boom is repositioned
more towards the center of the machine compared to a standard
excavator. This reduces the front swing radius when the boom
is pulled all the way up and the stick brought in completely.