Milton CAT 777F - Manual (Page 5)

Mechanical Power Train. The Cat
mechanical drive power train and power
shift transmission provides unmatched
operating efficiency and control
on steep grades, in poor underfoot
conditions, and on haul roads with
high rolling resistance.
Transmission. Pairing the Caterpillar
seven-speed planetary power shift
transmission with the C32 diesel engine
with ACERT Technology delivers
constant power over a wide range of
operating speeds.
• Long Life. A dedicated transmission oil
tank and circuit provides cooler, cleaner
oil for maximum performance and
longer component life.
• Transmission Chassis Control (TCC).
TCC uses electronically transferred
engine rpm data to execute shifts at
preset points for optimum performance,
efficiency and clutch life.
Lock-Up Torque Converter. Combines
maximum rimpull and cushioned
shifting of torque converter drive with
the efficiency and performance of direct
drive. The lock-up torque converter
engages at approximately 8 km/h (5 mph),
delivering more power to the wheels.
• Lock-Up Clutch. Quickly releases and
re-engages to reduce power train torque
loads for smoother shifting, long life
and a more comfortable ride.
• ECPC (Electronic Clutch Pressure
Control) System. ECPC modulates
clutch engagement individually, allowing
for smoother speed and directional
shifts. ECPC provides controls for both
the torque converter lock-up clutch and
the transmission clutches that are tailored
to each particular upshift or downshift.
This provides the operator a superior
ride and reduced fatigue.
Final Drives. Cat final drives work as a
system with the planetary power shift
transmission to deliver maximum power
to the ground. Built to withstand the
forces of high torque and impact loads,
double reduction final drives provide
high torque multiplication to further
reduce drive train stress.
Steering System. Hydraulic steering
control system is designed for exceptional
smoothness and precise control.
A separate circuit prevents cross
contamination for long life.
• Secondary Steering. Battery powered
secondary steering system allows up
to three 90 degree turns in case of
engine failure.
Wheels and Rims. Cast rear wheels and
Cat center-mount rims are mounted using
studs and nuts to minimize maintenance
and maximize durability.
5
Power Train – Transmission
Cat power train delivers more power to the ground for greater productivity and lower
operating costs.