Milton CAT 16M - Manual (Page 22)

22 16M Motor Grader specifications
Dimensions
All dimensions are approximate, based on standard machine configuration with 18.00-25 12PR (G-2) tires.
1 Height – top of cab 3703 mm 145.8 in
2 Height – front axle center 688 mm 27.1 in
3 Length – between tandem axles 1841 mm 72.5 in
4 Length – front axle to moldboard 3069 mm 120.8 in
5 Length – front axle to mid tandem 6985 mm 275 in
6 Length – front tire to rear of machine 9963 mm 392.2 in
7 Length – counterweight to ripper 11 672 mm 459.5 in
8 Ground clearance at rear axle 407 mm 16 in
9 Height to top of cylinders 3088 mm 121.6 in
10 Height to exhaust stack 3405 mm 134.1 in
11 Width – tire center lines 2509 mm 98.8 in
12 Width – outside rear tires 3096 mm 121.9 in
13 Width – outside front tires 3096 mm 121.9 in
2
9
1
8
10
4 3
5
11
12
13 6
7