Milton CAT IT62H - Manual (Page 13)

STEERING SYSTEM. The conventional
steering configuration offers a low-
effort hand metering unit hydraulic
steering system. Load sensing steering
directs power through the steering
system only when needed. When not
steering, more engine power is available
to generate rimpull, breakout force, lift
force, and results in reduced fuel
consumption. The steering column tilts
for maximum operator comfort.
The transmission is controlled by the
shift lever located on the left side of the
steering column. To upshift or
downshift, the operator rotates the knob
on the end of the shift lever. For
directional shifts, the lever is moved
forward or backward.
CONTROLS. The main control panel on
the IT62H is located high on the right
ROPS post – keeping everything within
reach of the operator while maintaining
visibility to the ground. Keeping all
switches and controls conveniently
placed allows better efficiency and
improved productivity all while
minimizing operator fatigue. The front
dash panel is conveniently laid out for
easy monitoring of gauges and
operation of controls.
13