Milton CAT D11T CD - Manual (Page 22)

22 D11T/D11T CD Track-Type Tractor specifications
Ripper
Redesigned ripper frame for improved visibility to ripper tip. Hydraulic tip adjustment cylinders vary shank angle to aid
penetration and help lift and shatter rock.
D11T D11T/D11T CD D11T CD
Single-shank
Deep Ripping + Multi-shank + Multi-shank
Single-shank Arrangement Arrangement Single-shank Arrangement
Overall beam width mm — — 3330 — 3330
ft/in — — 10'11" — 10'11"
Maximum penetration force*
(shank vertical)
kN 288 292 277 326 306
lb 64,800 65,644 62,325 73,350 68,850
Maximum penetration
(standard tip)
mm 1612 2172 1070 1612 1070
ft/in 5'3" 7'2" 3'6" 5'3" 3'6"
Pryout force
(multi-shank ripper
kN 660 657 646 642 650
with one tooth) lb 148,500 147,772 145,350 144,450 146,250
Maximum clearance raised
(under tip, pinned
mm 1115 878 1137 1115 1137
in bottom hole) in 43.9" 34.6" 44.8" 43.9" 44.8"
Number of shank holes 4 3 2 4 2
Weight
(without hydraulic
kg 9643 10 022 9698 12 733 12 025
controls) lb 21,215 22,050 21,335 28,076 26,515
Total operating weight** with 11U ABR blade and ripper with 11CD blade and ripper
kg 104 590 104 970 104 485 113 000 112 521
lb 230,100 230,935 229,867 248,600 247,039
* Specifications are converted from British to metric measure and rounded.
** Operating weight includes lubricant, coolant, full fuel tank, hydraulic controls, 810 mm (32 in) extreme service shoe, ROPS,
FOPS cab, and operator.
+ Includes one shank. Add 671 kg (1,489 lb) for each additional shank.
Note: Single-shank, deep ripping arrangement weight includes required pin puller.
Features
• Optional single-shank pin puller lets operator adjust shank depth from seat
• Large one-piece shank
• Multi-shank ripper allows variable use of one, two, or three shanks to match job conditions