Milton CAT RM 500 - Manual (Page 14)

14 RM-500 specifications
Roll Over Protective Structure (ROPS)
is a two-post structure that bolts directly
onto flanges welded to the mainframe.
The structure meets ISO 3471. The
structure can be field installed.
Falling Object Protective Structure
(FOPS) that bolts directly to the ROPS
which provides Level 1 protection and
also serves as a sun canopy. The
structure meets ISO 3449. The structure
can be field installed.
Sliding Cab includes a rotating cloth
seat, sound absorbing headliner, left and
right side lockable doors, tinted glass,
air conditioning, heater/defroster, dual
front and rear windshield wipers and
rubber floor mat. The cab is also radio-
ready and includes a power converter,
antenna with cable, two speakers and a
headliner location for mounting.
Roading Light Package includes two
front-facing headlights, two amber
running lamps, four amber turn
signal/hazard lamps and a slow moving
vehicle sign. Light package used for
highway transport purposes only.
Warning Beacon Light includes an
amber rotating beacon mounted on a
retractable pole and mount.
Friction Torque Limiter protects rotor
drive train from high torque loads in the
event the rotor strikes an immovable
object. The limiter slips momentarily
without interrupting machine operation.
Mirror Package includes two
adjustable mirrors mounted on both
sides of the machine for good visibility
to the rear and along the sides of the
machine.
Umbrella provides sun and rain
protection for the operator and includes
a support shaft and mounting hardware.
Only for use on open platform machines
without ROPS or cab.
Water Spray System accurately adds
water to processed material. System
includes a operator interface panel,
hydraulic filter, EDC controlled
hydraulic pump, a 379 - 1895 liters
(100 - 500 U.S. gallons) per minute
vane-type centrifugal pump, in-line flow
meter, spray bar with nozzles and
hydraulically operated single valve
spray bar shut-off.
Universal Rotor is designed for use in
asphalt reclamation and features
breakaway bolt-on tool holders.
Maximum cutting depth is
406 mm (16").
Soil Rotor is designed for use in soil
stabilization and features weld-on tool
holders. Maximum cutting depth is
508 mm (20").
Combination Rotor is designed
primarily for use in soil stabilization
with secondary application in light cuts
of asphalt reclamation and features
breakaway bolt-on tool holders.
Maximum cutting depth is
508 mm (20").
Counterweight Kit is a bolt-on weight
kit that attaches to the rear of the
machine. The kit is recommended when
operating in tough reclamation jobs
exceeding 25 cm (10") of asphalt.
Optional Equipment
N ote: Some options listed may be an option in some areas and standard in others. Consult your dealer for specifics.
Tires
Front
26.5" x 25" 20-ply lug-type R-1
345 kPa (50 psi)
Rear
23.1" x 26" 16-ply lug-type R-1
241 kPa (35 psi)
Electrical
The 24-volt electrical system consists
of two maintenance-free Cat batteries.
Electrical wiring is color-coded,
numbered, wrapped in vinyl-coated
nylon braid and labeled with
component identifiers. The starting
system provides 1365 cold cranking
amps (cca). The system includes a
95-amp alternator.
Frame
Fabricated from heavy gauge steel
plates and structural steel tubing. Frame
joined to rear bolster with welded-in
trunion and spherical plain bearings to
allow rear bolster oscillation of 15º.