Milton CAT 320D LRR - Manual (Page 23)

23 320D LRR Hydraulic Excavator specifications
STICK – 3.9 m (12'10")
BUCKET – 0.82 m
3 (1.07 yd 3 )
UNDERCARRIAGE – Long
SHOES – 800 mm (32") triple grouser BOOM – 5.7 m (18'9")
HEAVY LIFT – ON
1.5 m (5.0 ft) 3.0 m (10.0 ft) 4.5 m (15.0 ft) 6.0 m (20.0 ft) 7.5 m (25.0 ft) 9.0 m (30.0 ft) 10.5 m (35.0 ft)
m
ft
9.0 m kg
30.0 ft lb
7.5 m kg *2900 *2900 *1550 *1550 8.94
25.0 ft lb *5,850 *5,850 *3,450 *3,450 29.05
6.0 m kg *3300 *3300 *1500 *1500 9.78
20.0 ft lb *7,250 *7,250 *3,250 *3,250 31.96
4.5 m kg *3600 3450 *2750 2350 *1450 *1450 10.29
15.0 ft lb *7,850 7,300 *5,250 5,000 *3,200 *3,200 33.71
3.0 m kg *4600 *4600 *4100 3300 *3650 2300 *1550 *1550 10.52
10.0 ft lb *10,000 *10,000 *8,900 7,050 *7,300 4,900 *3,350 *3,350 34.52
1.5 m kg *11 950 *11 950 *7650 7250 *5650 4600 *4700 3150 3900 2250 *1650 *1650 10.50
5.0 ft lb *27,200 *27,200 *16,450 15,600 *12,250 9,800 *10,150 6,700 8,350 4,750 *3,600 *3,600 34.46
Ground kg *7450 *7450 *9250 6750 *6600 4300 5200 3000 3850 2150 *1850 1700 10.23
Line lb *17,150 *17,150 *19,950 14,450 *14,250 9,250 11,100 6,400 8,200 4,600 *4,050 3,750 33.55
–1.5 m kg *4800 *4800 *9050 *9050 *10 050 6450 *7150 4150 5050 2900 *3350 2100 *2150 1900 9.67
–5.0 ft lb *10,700 *10,700 *20,550 *20,550 *21,750 13,850 *15,500 8,850 10,850 6,200 *4,750 4,150 31.69
–3.0 m kg *7700 *7700 *12 400 *12 400 *10 150 6400 7200 4050 5050 2850 *2700 2250 8.78
–10.0 ft lb *17,300 *17,300 *28,150 27,350 *21,900 13,700 15,450 8,750 10,800 6,150 *6,000 5,000 28.69
–4.5 m kg *11 400 *11 400 *13 950 13 050 *9350 6500 *6700 4150 *3800 3100 7.41
–15.0 ft lb *25,700 *25,700 *30,000 27,950 *20,100 13,950 *14,350 8,900 *8,500 6,950 24.06
–6.0 m kg *10 600 *10 600 *7150 6750 *5050 4750 5.66
–20.0 ft lb *22,350 *22,350 *14,950 14,600 *11,100 10,950 18.13
–7.5 m kg
–25.0 ft lb
Load at
Maximum Reach Load Point
Height Load Radius
Over Front Load Radius
Over Side
Reach Boom Lift Capacities for 6 Metric Ton Counterweight
* Limited by hydraulic capacity rather than tipping load. The above loads are in compliance with SAE hydraulic excavator lift capacity rating standard J1097.
They do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. Weight of all lifting accessories must be deducted from the above
lifting capacities.
1.5 m (5.0 ft) 3.0 m (10.0 ft) 4.5 m (15.0 ft) 6.0 m (20.0 ft) 7.5 m (25.0 ft) 9.0 m (30.0 ft)
m
ft
9.0 m kg
30.0 ft lb
7.5 m kg *2000 *2000 7.84
25.0 ft lb *4,450 *4,450 25.38
6.0 m kg *3650 3500 *1900 *1900 8.81
20.0 ft lb *4,200 *4,200 28.74
4.5 m kg *4700 *4700 *4400 3400 *1900 *1900 9.38
15.0 ft lb *10,200 *10,200 *9,600 7,250 *4,150 *4,150 30.71
3.0 m kg *11 300 *11 300 *7150 *7150 *5550 4850 *4800 3300 *1950 *1950 9.64
10.0 ft lb *24,000 *24,000 *15,350 *15,350 *12,050 10,400 *10,450 7,100 *4,300 *4,300 31.61
1.5 m kg *9000 7100 *6500 4600 *5300 3200 *2100 2050 9.61
5.0 ft lb *19,350 15,300 *14,050 9,850 *11,450 6,800 *4,650 4,500 31.54
Ground kg *6400 *6400 *10 150 6750 *7250 4400 5250 3100 *2400 2150 9.30
Line lb *14,650 *14,650 *21,850 14,500 *15,650 9,400 11,300 6,600 *5,250 4,750 30.52
–1.5 m kg *5900 *5900 *9950 *9950 *10 450 6650 7400 4300 5200 3050 *2800 2450 8.68
–5.0 ft lb *13,200 *13,200 *22,600 *22,600 *22,600 14,250 15,900 9,200 11,200 6,500 *6,200 5,350 28.44
–3.0 m kg *9950 *9950 *14 650 13 250 *9950 6650 *7250 4300 *3600 3050 7.65
–10.0 ft lb *22,300 *22,300 *31,700 28,350 *21,550 14,300 *15,600 9,200 *8,000 6,700 24.97
–4.5 m kg *12 150 *12 150 *8450 6850 *5800 4450 *4000 *4000 6.02
–15.0 ft lb *26,000 *26,000 *18,050 14,750 *9,300 *9,300 19.59
–6.0 m kg
–20.0 ft lb
STICK – 2.9 m (9'7")
BUCKET – 0.82 m
3 (1.07 yd 3 )
UNDERCARRIAGE – Long
SHOES – 800 mm (32") triple grouser BOOM – 5.7 m (18'9")
HEAVY LIFT – ON
* Limited by hydraulic capacity rather than tipping load. The above loads are in compliance with SAE hydraulic excavator lift capacity rating standard J1097.
They do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. Weight of all lifting accessories must be deducted from the above
lifting capacities.
Always refer to the appropriate Operation and Maintenance Manual for specific product information.
Load at
Maximum Reach Load Point
Height Load Radius
Over Front Load Radius
Over Side