Rotor housing, Conveyor system, Steering – Milton CAT PM 102 User Manual

Page 9: Water spray system, Hydraulic system, Brakes, Pm-102 specifications

Advertising
background image

9

Rotor Housing

■

Rotor housing is made with hi-grade
anti-wear material for long service
life.

■

Large discharge opening clears out
the rotor housing fast for increased
production and reduced tool wear.

■

Side plate contact surfaces features
wear-resistant materials for reduced
wear and longer service life.

■

Floating moldboard with adjustable
down pressure is standard.

■

Height control for rotor door located
at operator’s station and at two
ground level control stations.

Steering

Hydraulic power-assist steering with
steering wheel on operator’s console.

Features

■

Double-acting steering cylinders
control the front and right rear tracks.

■

Steering of the right rear track is
electronically controlled with angle
adjusted in relation to the position of
the front tracks.

Turning Radius (to the right):

Track undercarriage

3.45 m (11' 3")

Wheel undercarriage

2.10 m (6' 8")

Brakes

Primary Brake Features

■

Closed-loop hydrostatic drive
provides dynamic braking during
normal operation.

Parking Brake Features

■

Spring-applied/hydraulically-released
multiple disc type brake mounted on
each gear reducer. Brakes are applied
automatically when propel lever is in
the neutral detent position.

■

Secondary brakes are activated by a
button on the operator’s console, loss
of hydraulic pressure in the brake
circuit or when the engine is shut
down.

■

Propel pump is destroked when
parking brake is engaged. Propel
lever must be returned to neutral after
brake is released before machine will
propel.

Conveyor System

■

Collecting conveyor is driven by a
high torque hydraulic motor to ensure
maximum production and clearing
out the rotor housing effectively.

■

Variable belt speed control for
collecting and front loading
conveyors controls loading of milled
materials to closely match material
type and amount.

■

Both conveyor belts can be reversed
for quick clean out.

■

Folding front loading conveyor
facilitates machine transportation.

Collecting Conveyor

Width

550 mm

21.6"

Speed

252 mpm

827 fpm

Upper Conveyor

Length

6.3 m

20' 6"

Width

600 mm

23.6"

Speed

252 mpm

827 fpm

Swing (from center)

41 degrees

PM-102 specifications

Water Spray System

■

Centrifugal pump supplies water to
spray nozzles for dust control and
belt lubrication.

■

Water spray nozzles focuses the
water spray in a flat fan pattern to the
rotor for better cooling of cutting
tools.

■

Nozzles are easily removed for
inspection and replacement without
the need for tools.

■

Standard system includes gauges to
monitor water pressure, a low water
level indicator and water control
valves to conserve water usage.

■

Water tank can be filled from the top
of the machine or at ground level.

Hydraulic System

■

Pumps for propel, collecting and
upper conveyors, auxiliary hydraulics
and cooling fan are installed on the
engine mounting pad.

■

Hydraulic oil cooler located at the
rear of the machine is designed for
efficient cooling and easy access for
cleaning.

■

Three-micron filtration on pressure
side of auxiliary flow and seven-
micron filtration on return side.

■

Quick-connect hydraulic test ports
simplify system diagnostics.

Advertising