Printronix Online Data Validator - Manual (Page 90)

Chapter 2 Bar Code Failures
90
For more information on choosing a value for the Number of Codes
parameter, see “Setting Number of Bar Codes on a Form” on
page 59.
Validator Action (Error Action)
The printer response is the same whether the error stems from a
bad or missing bar code. It is determined by the Validator Action
setting in the VALIDATOR menu:
1. Press to take the printer offline and place the printer in
Menu mode.
2. If necessary, press
↓ and ↵
at the same time to unlock the
↵
key.
3. Press until VALIDATOR displays.
4. Press ↓ until Validator Action displays.
5. Press + or – to scroll through the choices:
• Retry Form (default)
• Stop & Retry
• Grade&Report
• Rescan Form
• Rescan&Retry
• Rescan&Stop
• Stop
• Overstrike
These options are described in detail below.
6. Press
↵
to select the desired value.
7. Press ↓ and ↵
at the same time to lock the
↵
key, then press
PAUSE to take the printer offline.
8. Press PAUSE again to put the printer online.
..
.
..
.