Uncle Milton Star Theater Pro - Manual (Page 6)

Figure 6
Figure 7
Figure 8
Wall Projection
8 ft
[2.4 m]
6.5 to 7.5 ft
[2 to 2.3 m]
Ceiling
Projection
8 ft [2.4 m]
6.5 to 7.5 ft
[2 to 2.3 m]
HOW TO CHANGE THE IMAGE DISC
1. Shut off projector by pressing ON/OFF button
so that the LED indicator goes off (Figure 8).
2. Open image disc tray by pressing open
button, and remove the image disc (Figure 5).
3. Insert another image disc, making sure disc is
right-side-up, with the “© UMI” inscription
centered between the two front tabs. Close
image disc tray manually until it clicks
(Figure 6).
4. Turn on projector by pressing ON/OFF button
so that the LED indicator glows red (Figure 8).
HOW TO ADJUST THE PROJECTION ANGLE
• Rotate projection sphere in its base for wall or
ceiling projection.
• Projection surface should be flat, smooth and
white or light-colored. The brightness and
contrast of the projected image depend on
the projection surface and on the darkness of
the room.
• Optimal projection distance is 6.5 to 7.5 ft (2 to
2.3m) (Figure 4).
6
©U
M
I