M-AUDIO Transit USB - Manual (Page 8)

15
E
N
G
L
I
S
H
14
E
N
G
L
I
S
H
9. If you are running an older version of Windows ME, you may be required to replace the
file stream.sys. Click Yes to continue.
10. After the installation is complete, you may double-click on the M-Audio Transit USB
Control Panel icon to open the Transit USB Control Panel. See the section “Transit USB
Control Panel” for more information on the Control Panel’s features and function.
Windows 98SE
Note: Transit USB requires that you have Microsoft DirectX version 8.1 or later
installed. The Transit USB installer will automatically check for the correct
version of DirectX and install the latest Direct X update. This update will be
skipped if you already have DirectX version 8.1 (or higher) in your system.
1. Place the Transit USB CD into your CD-ROM drive. Do NOT connect the Transit USB
to your computer’s USB port at this time. Browse the CD content and double click the
Transit USB folder.Then double click the Transit USB Icon.
2. The M-Audio Transit USB Installer screen will appear,asking you to confirm that you wish
5. After the driver files have been installed, you will be prompted to restart your computer.
Click Finish and your computer will reboot.
6. On rebooting, the M-Audio Transit USB Control Panel icon will appear in the system tray.
Connect the Transit USB to your computer’s USB port.
7. The New Hardware Wizard will write the remaining files to your system.
8. If you are running an older version of Windows ME, you may be required to replace the
file ksuser.dll. Click Yes to continue.