Velleman VDPLTC2 - Manual (Page 4)

VDPLTC2 HQPOWER 4
4. Description
1. DMX output
2. DMX input
3. power input
4. signal output
5. DIP switches
5. Controller Installation
→ → → →
Connect each device using a DMX cable.
Data Function
1 ground
2
B female signal
3 A male signal
6. Use
The VDPLTC2 can be used in stand-alone mode through the DIP switches, through pre-programmed effects with
speed adjustment, and through a DMX512 signal.
• Stand-Alone
DIP Switch settings:
ON Effect
1,2,3 Red
4,5 Green
7,8 Blue
9 Colour effect (speed can be adjusted through DIP switch 1 to 8)
• DMX Signal
Detailed DMX Values per Channel
Channel Function From To Description
1 Dimmer / Shutter
0 150 Dimmer from 0 to 100 %
151 255 Shutter from slow to fast
2 Red 0 255 From 0 to 100 %
3 Green 0 255 From 0 to 100 %
4 Blue 0 255 From 0 to 100 %
tube 1 tube 2 tube n DMX controller LED controller