Velleman VDPL300HD User Manual
Page 5
VDPL300HD
V. 02 – 03/01/2013
5
©Velleman nv
Program
Function
Red, green and blue
Red, green and blue single colour auto running
Red, green and blue mix colour auto running
Red, green and blue strobe
c.
In master-slave mode
The master/slave mode allows connecting several devices to a single master device. All slave devices will then
work synchronously with the master device.
You need to set one device to master mode and all other devices to slave mode. Connect all devices in series
with DMX cables.
To set the master device:
1.
Press Menu until
appears and confirm with Enter.
2.
Press Up or Down until
appears and confirm with Enter.
To set another device to slave mode:
3.
On the other device, press Menu until
appears and confirm with Enter.
4.
Press Up or Down until
appears and confirm with Enter.
Repeat this for every slave device.
d.
With a DMX512 controller
The DMX mode allows controlling the unit through a universal DMX controller.
DMX512 values per channel
Channel From
To
Function
1
0
3
Lights off
4
255
Adjust brightness for all colours, from dark to bright
2
0
3
Lights off
4
255
Adjust brightness for red
3
0
3
Lights off
4
255
Adjust brightness for green
4
0
3
Lights off
4
255
Adjust brightness for blue
5
0
15
Strobe off
16
255
Strobe speed from slow to fast
6
0
4
Lights off
5
255
Red, green and blue colours auto running, speed from slow to fast
7
0
5
Motor off
6
127
Adjust motor
128
255
Motor automatic running and speed from slow to fast
8
0
10
Sound control off
11
127
Sound control type 1, only works if there is sound.
128
255
Sound control type 2 with strobe effect, will run automatically if
there is no sound