Anwendung, Reinigung und wartung, Technische daten – Velleman VDPSP0x User Manual

Page 15

Advertising
background image

VDPSP0x

05.09.2011

©Velleman nv

15

VDPSP04: verwenden Sie nur die 3-Pin oder die 5-Pin Ausgänge eines Kanals; verbinden Sie

DMX-Geräte nie gleichzeitig mit beiden Ausgängen.

Bemerkungen: vergewissern Sie sich, dass das letzte Gerät der DMX-Serie, verbunden mit

einem Ausgang [4] des VDPSP0x, einen eigenen Abschlusswiderstand hat. Der DMX-

Abschlusswiderstand ist nur eine XLR-Buchse mit einem 120Ω Widerstand zwischen 2 und 3,

die den XLR-Ausgang des letzten Geräts in der Kette angeschlossen wird.

7. Anwendung

Lassen Sie das Gerät von einem qualifizierten Elektriker anschließen.

Beachten Sie, dass alle Geräte über eine geerdete Steckdose und nicht über einen

Regelwiderstand oder Dimmkreis versorgt werden, auch wenn Sie den Regelwiderstand oder den

Dimmkreis als EIN/AUS-Schalter (0% bis 100%) verwenden.

Die rote LEDs [5] leuchten sobald die DMX-Ausgänge eingeschaltet sind; die grüne LEDs [5]

leuchten sobald es effektiv ein DMX-Signal im Kanal gibt.

8. Reinigung und Wartung

Das Gerät braucht keine regelmäßige Wartung.

Verwendete Schrauben müssen fest angespannt werden und dürfen keine Rostspuren zeigen.

Sorgen Sie dafür, dass die Netzkabel nicht beschädigt sind. Lassen Sie das Gerät von einer

Fachkraft installieren.

Entfernen Sie den Staub regelmäßig mit einem feuchten Tuch vom Gehäuse und den

Lüftungsschlitzen.

Die Teile dürfen nicht eigenmächtig ersetzt werden. Bestellen Sie eventuelle Ersatzteile bei Ihrem

Fachhändler.

9. Technische Daten

VDPSP04 VDPSP08

Stromversorgung

230Vac / 50Hz

Eingänge

3- und 5-pol. XLR

3-pol. XLR

Ausgänge

3- und 5-pol. XLR

3-pol. XLR

Abmessungen

270 x 145 x 70mm

Gewicht 1.5kg

1.5kg

Verwenden Sie dieses Gerät nur mit originellen Zubehörteilen. Velleman NV übernimmt

keine Haftung für Schaden oder Verletzungen bei (falscher) Anwendung dieses Gerätes. Für

mehr Informationen zu diesem Produkt und die neueste Version dieser

Bedienungsanleitung, siehe www.hqpower.eu. Alle Änderungen ohne vorherige

Ankündigung vorbehalten.

Velleman® Service and Quality Warranty

Velleman® has over 35 years of experience in the electronics
world and distributes its products in more than 85 countries.

All our products fulfil strict quality requirements and legal

stipulations in the EU. In order to ensure the quality, our
products regularly go through an extra quality check, both by

an internal quality department and by specialized external
organisations. If, all precautionary measures notwithstanding,

problems should occur, please make appeal to our warranty

(see guarantee conditions).
General Warranty Conditions Concerning Consumer

Products (for EU):
• All consumer products are subject to a 24-month warranty on

production flaws and defective material as from the original

date of purchase.
• Velleman® can decide to replace an article with an equivalent

article, or to refund the retail value totally or partially when the
complaint is valid and a free repair or replacement of the article

is impossible, or if the expenses are out of proportion.

You will be delivered a replacing article or a refund at the value
of 100% of the purchase price in case of a flaw occurred in the

first year after the date of purchase and delivery, or a replacing
article at 50% of the purchase price or a refund at the value of

50% of the retail value in case of a flaw occurred in the second

year after the date of purchase and delivery.
• Not covered by warranty:

- all direct or indirect damage caused after delivery to the

article (e.g. by oxidation, shocks, falls, dust, dirt, humidity...),
and by the article, as well as its contents (e.g. data loss),

compensation for loss of profits;
- frequently replaced consumable goods, parts or accessories

such as batteries, lamps, rubber parts, drive belts... (unlimited

list);
- flaws resulting from fire, water damage, lightning, accident,

natural disaster, etc. …;
- flaws caused deliberately, negligently or resulting from

improper handling, negligent maintenance, abusive use or use

contrary to the manufacturer’s instructions;
- damage caused by a commercial, professional or collective

use of the article (the warranty validity will be reduced to six
(6) months when the article is used professionally);

- damage resulting from an inappropriate packing and shipping

of the article;
- all damage caused by modification, repair or alteration

performed by a third party without written permission by
Velleman®.

• Articles to be repaired must be delivered to your Velleman®

dealer, solidly packed (preferably in the original packaging),
and be completed with the original receipt of purchase and a

Advertising